Chilham, Kent · CT4
Brewery security: risks, requirements and specification
Finished stock, kegs and casks are bulky but valuable in volume, and production areas hold equipment that's both expensive and, in places, hazardous if accessed by untrained individuals. This page sets out what a Chilham brewery should be asking for, and where door and window contact systems fit into it.
- Sector: breweries
- Lead service: CCTV systems
- Exposure: Overnight and weekends when the site is unstaffed present the main theft risk to stored stock.
Primary risk
Finished stock, kegs and casks are bulky but valuable in volume, and production areas hold equipment that's both expensive and, in places, hazardous if accessed by untrained individuals.
First priority
Perimeter detection out of hours
Common pitfall
Focusing camera coverage entirely on the taproom or visitor area while leaving the actual stock and production areas comparatively under-protected.
The obligation behind the specification
This is the part that turns a shopping list into a specification.
- Excise and duty record-keeping requirements mean stock movement should be traceable, which cameras can support
What is actually at risk
Finished stock, kegs and casks are bulky but valuable in volume, and production areas hold equipment that's both expensive and, in places, hazardous if accessed by untrained individuals.
Exposure window: Overnight and weekends when the site is unstaffed present the main theft risk to stored stock.
The remedial job we get called to
Focusing camera coverage entirely on the taproom or visitor area while leaving the actual stock and production areas comparatively under-protected.
The specification, itemised
- Perimeter detection out of hours
- An unstaffed site holding significant stock value benefits from active alerting rather than passive recording alone.
- Finished stock and cask storage camera coverage
- Bulk keg and cask theft is a recognised risk and benefits from direct rather than incidental coverage.
Boundaries worth knowing now
Every approach has an edge; here is where this one sits.
- A contact only reports that an opening moved, it does not detect someone entering through glass without opening the frame.
How door and window contact systems apply here
Simple two-part magnetic switches fitted to a door or window and its frame, reporting an open-closed state to the alarm panel as the most basic and reliable form of perimeter detection.
- Properties wanting entry detection without room-by-room motion sensing
- Part-set modes where downstairs motion detectors are unsuitable overnight
The support call this sector makes most: emergency door release button not working
Once a system has been in a while, fix a break-glass or push-to-exit emergency release that fails to open the door is a common reason for a brewery to ring.
Usually it comes down to lock fail-secure rather than fail-safe on this circuit, if the lock type was specified incorrectly for the application, the emergency release may not be wired to interrupt power in the way expected.
Before booking anyone, inspect the break-glass unit for a triggered or cracked element needing reset.
Chilham in practice
Chilham work tends to cluster near Chilham Square and Chilham Castle, where the housing stock is mostly Victorian villas and modern detached on Mountain Street, and that mix decides where cable can run and where detection earns its place.
An alternative worth weighing up
- Internal motion detection
- Whole-room coverage is wanted in addition to individual opening points.
Chilham questions we get asked
Brewery security: risks, requirements and specification
Local detail for Chilham
- Surveys carried out on site before anything is specified
- Written specification supplied with every quotation
- Takeover and repair of systems installed by others
Have the design justified line by line
Tell us what an incident would actually cost this business and the priorities more or less write themselves.
Speak to an engineerGet Your Free Quote
A few quick details, no email needed.